RFI Emission OS-214plus Spezifikationen PDF herunterladen (Seite 15)

Parallel Interface Requirements

The required cable (IEEE 1284-compliant is recommended) must

have a standard 36-pin parallel connector on one end, which is

plugged into the parallel port located on the back of the printer.

The other end of the parallel interface cable connects to the

printer connector at the host computer. For pin-out information,

refer to the Reference Technical Information, Interface

Specification.

Serial and Parallel Cabling Requirements

Data cables must be of fully shielded construction and fitted with

metal or metalized connector shells. Shielded cables and

connectors are required to prevent radiation and reception of

electrical noise.

To minimize electrical noise pickup in the cable:

 Keep data cables short (6 ft or 1.83m recommended).

 Do not tightly bundle the data cables with power cords.

 Do not tie the data cables to power wire conduits.

Notes:

1. Centronics allows a much higher communication speed

than serial.

2. The printer automatically detects parallel or serial port.

No need to set a switch or send a command.

3. Default settings are included in the configuration report.

Communicating with the Printer

The bundled printer driver can be applied to all applications

under Windows 2000/2003/Windows XP/Windows Vista and

Windows 7 and support 32/64 bits version. With this driver

you can run any popular Windows software applications

such as MS-Word and print out to this printer.

Installing the Printer Driver (Seagull Driver)

1. Double click the driver file

to execute in Windows.

2. Click "Next".

3. Write down the Installation

Directory (for example:

C:'Seagull) and click "Next".

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Keine Kommentare

RFI Emission OS-214plus Spezifikationen Seite 15