RFI Emission OS-214plus Bedienungsanleitung PDF herunterladen (Seite 15)

Hooking up the Printer and the Computer

Note :

The power supply barrel connector must be inserted into the

power jack on the back of the printer before connecting the

communication cables.

This printer comes with both a nine-pin Electronics Industries

Association (EIA) RS-232 serial data interface (for OS-203, it is

six pin) and a standard Centronics parallel interface. In either

case, you must supply the required interface cable for your

application.

Note :

This printer complies with FCC "Rules and Regulations”, Part 15,

for Class B Equipment, using fully shielded six-foot data cables.

Use of longer cables or unshielded cables may increase radiated

emissions above the Class B limits.

Serial (RS-232) Interface Requirements

The required cable must have a nine-pin "D" type (for OS-203, six

pin) male connector on one end, which is plugged into the mating

serial port located on the back of the printer. The other end of this

signal interface cable connects to a serial port at the host

computer.

For technical and pinout information, please refer to the

Reference Technical Information-Interface Specification.

OS-203

Power Jack

RS232 Serial Port

Parallel Port

OS-204/214/314

Power Jack

Parallel Port

RS232 Serial Port

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Keine Kommentare

RFI Emission OS-214plus Bedienungsanleitung Seite 15